zend server 6, getting blank page from :10081/zendserver

General discussion on Zend Server for IBM System i
Post Reply
hugo7098
Posts: 3
Joined: Fri Apr 19, 2013 1:45 pm

zend server 6, getting blank page from :10081/zendserver

Post by hugo7098 » Fri Apr 19, 2013 1:51 pm

Hello,
I've installed Zend Server 6, however when I go to :10081/zendserver I get no html from the server. I do get a http status of 200. I've confirmed this in both the apache logs and in Fiddler Web Debugger. However, no data is received from the server after the http headers. Any ideas any one?

-thanks,
Hugo.

zend_i5
Posts: 158
Joined: Mon Mar 23, 2009 5:22 pm

Re: zend server 6, getting blank page from :10081/zendserver

Post by zend_i5 » Sun Apr 21, 2013 2:52 pm

1. Check if Zend Server Apache jobs are running using the following command: WRKACTJOB JOB(ZENDSVR6)
ZENDSVR6 QTMHHTTP BCH .0 PGM-QZHBMAIN SIGW
ZENDSVR6 QTMHHTTP BCI .0 PGM-QZSRLOG SIGW
ZENDSVR6 QTMHHTTP BCI .0 PGM-QZSRLOG SIGW
ZENDSVR6 QTMHHTTP BCI .0 PGM-QZSRHTTP SIGW
ZENDSVR6 QTMHHTTP BCI .0 PGM-zfcgi SELW
ZENDSVR6 QTMHHTTP BCI .0 PGM-php-cgi.bi THDW
ZENDSVR6 QTMHHTTP BCI .0 PGM-php-cgi.bi TIMW
ZENDSVR6 QTMHHTTP BCI .0 PGM-php-cgi.bi TIMW
ZENDSVR6 QTMHHTTP BCI .0 PGM-php-cgi.bi TIMW

2. If the jobs are not active use Zend Server 6 for IBM i Service Menu to start Zend Server jobs:
- go zendsvr6/zsmenu
- Option 5 -> option 1

bobgenis
Posts: 14
Joined: Thu Feb 18, 2010 1:34 pm

Re: zend server 6, getting blank page from :10081/zendserver

Post by bobgenis » Tue Apr 23, 2013 9:24 pm

Not to hijack the thread but I am getting the same result (blank page when going to http://<host name>:10081/ZendServer). I have checked the ZENDSVR6 jobs and they are running on my i.

What would be the next troubleshooting step?

isaacsnk
Posts: 7
Joined: Tue Jan 11, 2011 9:17 pm

Re: zend server 6, getting blank page from :10081/zendserver

Post by isaacsnk » Fri Sep 13, 2013 4:20 pm

Has anyone found a solution about this issue? I have the same problem.

andy4298
Posts: 14
Joined: Thu Oct 23, 2014 8:41 pm

Re: zend server 6, getting blank page from :10081/zendserver

Post by andy4298 » Thu Oct 23, 2014 8:43 pm

This also happens when you run out of disk space.

brya5265
Posts: 68
Joined: Tue Feb 19, 2013 2:26 pm

Re: zend server 6, getting blank page from :10081/zendserver

Post by brya5265 » Fri Oct 24, 2014 9:54 pm

What are the last lines in your php.log?
5250 terminal:
===> wrklnk '/usr/local/zendsvr6/var/log/php.log'
action 5 to view, enter 'b' in the control field to go to the bottom.

qsh:
tail /usr/local/zendsvr6/var/log/php.log

--Bryan

zend_i5
Posts: 158
Joined: Mon Mar 23, 2009 5:22 pm

Re: zend server 6, getting blank page from :10081/zendserver

Post by zend_i5 » Sun Jan 18, 2015 2:19 pm

Here is another way to check why the Zend Server Apache jobs do not start. Start Zend Server using STRHTTPSVR command:
STRTCPSVR SERVER(*HTTP) HTTPSVR(ZENDSVR6 '-ve')

If Zend Server jobs did not start in QHTTPSVR subsystem then check the error log printed in QTMHHTTP spool files: WRKSPLF SELECT(QTMHHTTP)

Post Reply