Zend Server start failed after update

General discussion forum for the Zend Server
Post Reply
Posts: 1
Joined: Tue May 23, 2017 3:36 pm

Zend Server start failed after update

Post by carl6542 » Tue May 23, 2017 4:06 pm


I'm working on a project that I need to upgrade PHP (5.3 to 5.6) and Zend Server (7.0.0 to 8.5.2).

I use a Linux Red Hat 6.9.

So I changed the repository
with these URLs
http://repos.zend. com/zend-server/8.5.2_update1/rpm/x86_64/
http://repos.zend. com/zend-server/8.5.2_update1/rpm/noarch/

I cleaned the yum cache
yum clean all

I removed the previous version of PHP and Zend
yum remove php-5.3*
yum remove *zend*

I installed the new version
yum install *php-5.6*
yum install *zend*

I checked if the installation was correct
yum list installed | grep 'php\|zend'
java-daemon-zend-server.noarch 6.0.0-14 @Zend_noarch
libframework2-zend-server.noarch 2.2.5-285 @Zend_noarch
liboci8-zend.x86_64 @Zend
lighttpd-zend-server.x86_64 1.4.35-334 @Zend
php-5.6-bcmath-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-bin-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-bin-zend-server-dbg.x86_64 5.6.17-1 @Zend
php-5.6-bz2-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-calendar-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-ctype-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-curl-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-dev-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-exif-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-fcgi-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-fcgi-zend-server-dbg.x86_64 5.6.17-1 @Zend
php-5.6-fileinfo-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-fpm-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-fpm-zend-server-dbg.x86_64 5.6.17-1 @Zend
php-5.6-ftp-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-gd-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-gettext-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-gmp-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-ibmdb2-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-imagick-zend-server.x86_64 5.6.10-1 @Zend
php-5.6-imap-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-intl-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-ldap-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-mbstring-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-mcrypt-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-memcache-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-memcached-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-mongo-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-mssql-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-mysql-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-mysqli-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-oci8-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-odbc-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-pcntl-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-pdo-dblib-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-pdo-ibm-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-pdo-mysql-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-pdo-odbc-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-pdo-pgsql-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-pgsql-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-phar-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-posix-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-redis-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-shmop-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-soap-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-sockets-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-source-zend-server.noarch 5.6.17-2 @Zend_noarch
php-5.6-ssh2-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-sysvmsg-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-sysvsem-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-sysvshm-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-tidy-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-tokenizer-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-wddx-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-xdebug-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-xmlrpc-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-xsl-zend-server.x86_64 5.6.17-1 @Zend
php-5.6-zip-zend-server.x86_64 5.6.17-1 @Zend
zend-base.x86_64 8.5.2-11 @Zend
zend-server-doc.noarch 8.5.1-4 @Zend_noarch
zend-server-php-5.6-common.x86_64 8.5.2-660 @Zend

But when I try to start zend server, I have this error message:

/etc/init.d/zend-server restart
Stopping Zend Server 8.5.2 ..

zsd is not running
jqd is not running
zdd is not running
scd is not running
Stopping Zend Server GUI [Lighttpd] [OK]
monitor is not running

Zend Server stopped.
Starting Zend Server 8.5.2 ..

Starting Zend Server Monitor node [OK]
[23.05.2017 16:57:55 SYSTEM] watchdog for monitor is not running.
[23.05.2017 16:57:55 SYSTEM] monitor is not running.
spawn-fcgi: child spawned successfully: PID: 31938
Starting Zend Server GUI [Lighttpd] [OK]
[23.05.2017 16:57:57 SYSTEM] watchdog for lighttpd is running.
[23.05.2017 16:57:57 SYSTEM] lighttpd is running.
Starting Session Clustering daemon [OK]
[23.05.2017 16:57:58 SYSTEM] watchdog for scd is not running.
[23.05.2017 16:57:58 SYSTEM] scd is not running.
Starting Deployment [OK]
[23.05.2017 16:57:59 SYSTEM] watchdog for zdd is not running.
[23.05.2017 16:57:59 SYSTEM] zdd is not running.
Starting JobQueue [OK]
[23.05.2017 16:58:00 SYSTEM] watchdog for jqd is not running.
[23.05.2017 16:58:00 SYSTEM] jqd is not running.
Starting ZendServerDaemon [OK]
[23.05.2017 16:58:02 SYSTEM] watchdog for zsd is not running.
[23.05.2017 16:58:02 SYSTEM] zsd is not running.

Zend Server started...

I probably forgot something but I do not know what.

If someone know how to resolve this issue it will be great.

Thanks for your help.

User avatar
Posts: 266
Joined: Thu Jan 22, 2009 3:16 pm

Re: Zend Server start failed after update

Post by zend_eyalt » Tue May 23, 2017 8:23 pm


I suggest you open a support ticket at support.zend.com in order to get a support person to deal with this matter (that way he can get the support tool output and such).

Anyway a couple of things that I've noticed - why did you opt for ZS 8.5.2, while ZS 8.5.7 is the latest ZS on the 8.5 branch ?

Also, in general we recommend removing ZS by running:

and installing ZS via the repo installer.

Post Reply